Thermo Scientific Gallery Plus discrete analyzer, system with PC workstation

Thermo Scientific Gallery Plus Discrete Analyzer with PC and Barcode Scanner

$7,950.00
Skip to product information
Thermo Scientific Gallery Plus discrete analyzer, system with PC workstation

Thermo Scientific

Thermo Scientific Gallery Plus Discrete Analyzer with PC and Barcode Scanner

Automated discrete photometric analyzer, Type 862 without the ECM module, factory set up for water testing, sold with its PC workstation and Elo touchscreen running the Gallery Plus software, an Intermec SR30 barcode scanner, manuals and spare tubing, on 100-240 Vac.

$7,950.00
QC Pass Tested & WorkingLightly Used, Excellent
Add to Quote

Paying by PO? We'll send a formal quote first.

Shipping: $0.00 ground freight to the lower 48 states.

Alaska, Hawaii or international delivery? Request a freight quote.

At a Glance

Manufacturer
Thermo Scientific
Model
Gallery Plus (Type 862)
Part / Catalog #
98620001
Serial #
862000110189
Year / DOM
2015
Condition
Lightly Used, Excellent
BioLabTek

Photometers

Thermo Scientific Gallery Plus Discrete Analyzer with PC and Barcode Scanner

Automated discrete photometric analyzer, Type 862 without the ECM module, factory set up for water testing, sold with its PC workstation and Elo touchscreen running the Gallery Plus software, an Intermec SR30 barcode scanner, manuals and spare tubing, on 100-240 Vac.

QC PASS
Tested & Working
Lightly Used, Excellent

At a glance

Manufacturer
Thermo Scientific
Model
Gallery Plus (Type 862)
Part / Catalog #
98620001
Serial #
862000110189
Year / DOM
2015
Condition
Lightly Used, Excellent

What's Included

  • ✓Thermo Scientific Gallery Plus discrete analyzer, Type 862
  • ✓Desktop PC workstation with the Gallery Plus software
  • ✓Elo touchscreen monitor
  • ✓Keyboard and Logitech mouse
  • ✓Intermec SR30 2D tethered barcode scanner, in box
  • ✓Gallery Plus Operation Manual binder, revision 5.2A
  • ✓Gallery Plus documentation binder
  • ✓Dispensing probe (water), SP11253, in box
  • ✓Pump tube 984077, bagged
  • ✓Dispensing tube set N09591, diluent and wash tubes, bagged
  • ✓Dispensing tube set N09592, drain and waste tubes, bagged
  • ✓Tubing connector kit in box, as pictured
  • ✓Box of numbered sample and reagent racks
  • ✓Red transport locks
  • ✓Sealed box of 10 mL reagent bottles, REF 984050
  • ✓Nothing else is included unless shown in the photos

Condition & Testing

Analyzer powers on and communicates with the Gallery Plus software on the included workstation, which reports the system as Running; water and cuvettes were not loaded at the time of the photos; calibration verification is the responsibility of the buyer.

Specifications

Absorbance range 0 to 3.5 A
Barcode reading Code 128, Codabar, Interleaved 2 of 5 and Code 39 with check digit
Cuvettes Disposable DECACELL cuvettes; 36 on board, 360 measurement cells
Dimensions (W x D x H) 94 x 70 x 62 cm; 130 cm high with cover open
Dispensing precision CV 2% or less for volumes of 2 µL and over
Filters 12 filter positions, 340 to 880 nm
Incubation temperature 25 to 60 °C, no cooling, default 37 °C
Light source Xenon flash lamp
LIS interface CLSI LIS02-A2 over RS-232 or TCP/IP
Noise Under 60 dB(A) at 1 m
Operating environment 18 to 30 °C, 40 to 80% RH non-condensing
Photometer Single-channel interference filter photometer with reference beam splitter
Power 100-240 Vac, 50-60 Hz, 300 W
Reaction volume 120 to 300 µL
Reagent positions 42, in a cooled disk
Reagent vials 10 mL and 20 mL
Reagent volume 2 to 240 µL
Reproducibility SD under 0.005 A at 2 A
Resolution 0.001 A
Sample capacity Up to 108 samples in up to 6 racks of 9 or 18 positions
Sample containers 0.5, 2.0 and 4.0 mL cups and tubes
Sample volume 2 to 120 µL, extendable to 240 µL
Throughput Up to 350 tests/hour with a one-reagent method
Use restriction Research use only, not for use in diagnostic procedures
Water consumption 2.5 L/hour deionized water
Weight 110 kg

Specs from manufacturer literature for reference. Verify against your application.

Terms & Conditions

Payment

  • We accept most payment types and work with your organization's accounting requirements.
  • Need a formal quote or want to pay by PO? Contact us before you order.

Shipping

  • Items ship within 1 to 2 business days after cleared payment.
  • We ship by USPS, FedEx, UPS, or freight to all 50 states and internationally.
  • International buyers pay customs and import duties.
  • Need expedited service or billing to your own FedEx or UPS account? Tell us at purchase.
  • You may arrange your own shipping through your own carrier on request.

Return Policy

  • 60-day returns from the date of delivery, unless stated otherwise.
  • If something isn't right, contact us first so we can fix it.

Why BioLabTek

  • ✓We power on and function-test every unit and note all findings
  • ✓Photos show the exact unit you receive
  • ✓Instruments packed to survive the carrier
  • ✓POs and formal quotes welcome for academic and corporate buyers
BioLabTek  |  Scientific Equipment Specialists  |  © 2026 BioLabTek

Related Equipment